Split System Installation in Mackenzie – MHI BRONTE

Jaric completed a split system installation in Mackenzie, supplying and installing a 9.5kW Mitsubishi Heavy Industries BRONTE reverse cycle air conditioner in a residential living room. The installation was carefully planned around the existing window, with the indoor unit positioned above it and the outdoor unit mounted at ground level.

Project at a Glance

Service: Living-room split system installation
System: Mitsubishi Heavy Industries BRONTE
Capacity: 9.5kW cooling / 10.3kW heating
Model: DXK33ZRA-W-Set

The Challenge

This Mackenzie homeowner wanted a split system installed in the living room, centered above the existing window. The installation needed to accommodate the window layout and connect to a ground-level outdoor unit offset to the right.

The Solution

• Installed the Mitsubishi Heavy Industries BRONTE above the window, centered on the nominated internal wall.
• Mounted the outdoor unit on a ground-level polyslab, using the exterior position offset from the indoor unit.
• Routed the connections around the window layout, enclosing the external pipework and interconnecting cables in PVC trunking.

The Results

Before: A living-room wall and window without a wall-mounted split system.
After: A Mitsubishi Heavy Industries BRONTE installed above the window.

Heating and cooling: Rated capacity of 9.5kW cooling and 10.3kW heating.

Installation finish: The indoor unit sits above the existing window, with the outdoor unit supported at ground level and the external connection route enclosed.

Planning a Living-Room Air Conditioning Installation?

Talk to Jaric about system selection, unit placement and an installation suited to your home.

Get a Split System Installation Quote

Related project: Split system replacement in Petrie