Split System Replacement in Petrie – Mitsubishi Heavy Industries CIARA

Jaric completed a split system replacement in Petrie after an ageing Kelvinator air conditioner developed two failed outdoor circuit boards and noisy indoor fan bearings. The faulty equipment was removed and replaced with a Mitsubishi Heavy Industries CIARA reverse cycle system, including new pipework, cabling, isolation switch and mounting equipment.

Project at a Glance

Service: Split system replacement
System: Mitsubishi Heavy Industries CIARA
Model: DXK09ZTLA-WF-Set

The Challenge

The existing Kelvinator had two failed outdoor circuit boards, while noisy indoor fan bearings showed further wear. With several major components needing attention, replacement was recommended as the more economical long-term option.

The Solution

• Removed the old system: Decommissioned and removed both units.
• Renewed the installation: Installed the CIARA reverse-cycle system with new pipework, cabling, isolation switch and mounting equipment.
• Checked operation: Commissioned and tested the completed installation.

The Results

Before
An ageing system with multiple component faults.

After
A new Mitsubishi Heavy Industries reverse-cycle system for heating and cooling.

Supporting components renewed
Essential pipework and electrical connections were replaced alongside the equipment.

Repair or Replace Your Air Conditioner?

Jaric can assess the fault and explain your options before you decide.

Get Advice on Your Air Conditioner