10.0kW FDUA100VNPWVH
With a discreet design that can be completely concealed in your ceiling, and with the ability to heat or cool multiple rooms, MHI’s ducted systems offer a quiet and flexible solution for your entire home.
All MHI ducted systems are reverse cycle, come in both medium and high static designs, and include a wide range of convenient features and functions. It makes them the perfect climate solution for Aussie homes of any size.
KEY FEATURES
- External static pressure control
- Self-diagnostics function
- Weekly/sleep timer
- 600mm built-in drain pump
- Upgrade to MyAir
CAPACITY
- Cooling 10.kW
- Heating 10.kW
DIMENSIONS
- Indoor – 398 x 1150 x 650mm
- Outdoor – 750 x 880 (+88) x 340mm
Energy saving
SET TEMPERATURE AUTO RETURN
Program a preferred set temperature that the unit will return to each time it is switched on. Note: can only be enabled using the RC-EX3 wired controller.
HOME LEAVE OPERATION
This function ensures that when the room is unoccupied for long periods of time, the unit will maintain a moderate indoor temperature, avoiding extremely hot or cool temperatures and damage. Note: can only be enabled using the RC-EX3 wired controller.
Air Flow
AUTOMATIC FAN SPEED
The unit’s on-board microcomputer continuously monitors the room’s temperature and adjusts the fan speed accordingly.
Clean Air
FILTER SIGN
Alerts you to when the filter needs to be cleaned.
OUTSIDE AIR INTAKE
Allocated outside air inlet connection available on indoor unit to provide fresh air into the room, avoiding the constant recycling of internal air.
Disclaimer: Requires a separate outside air duct to be connected to indoor unit.
Comfort & Convenience
AUTOMATIC OPERATION
Automatically selects the required heating or cooling function based on the current room conditions and set temperature.
PEAK-CUT TIMER
Set the capacity limit during certain periods of the day, minimising energy consumption during peak billing times, thus reducing operation costs.Note: can only be enabled using the RC-EX3 wired controller.
FUNCTION SWITCH
From the six available functions on the unit, this function allows you to set two functions to operate automatically. (Note: this is not available when a centralised remote control is connected).Note: can only be enabled using the RC-EX3 wired controller.
HI POWER OPERATION
Provides 15mins of boosted power to quickly heat or cool your home before returning to normal operation. Perfect for when you first turn on it the unit.Note: For FDE, FDT, FDTC, FDUA, and FDUM series can only be enabled using the RC-EX3 wired controller.
SILENT OPERATION
Set periods of time where the unit will operate with reduced noise levels, perfect for night time and an uninterrupted sleep.
WEEKLY TIMER
Set your unit to turn on and off at specific times for each day of the week to suit your needs.
SLEEP TIMER
Set a pre-determined amount of time between 30 and 240 mins that your unit will operate for before switching off.
Maintenance
IMPROVED SERVICEABILITY
The fan unit (comprised of impeller and motor) is easily accessible from either the side or bottom of the unit and can be slid out for easy maintenance.
BUILT-IN DRAIN PUMP
The built-in drain pump allows greater flexibility with installation, offering a perfect solution for applications with limited space.
SELF-DIAGNOSTICS
In the unlikely event of a fault the internal microcomputer automatically runs a diagnostic of the system. This enables a service agent to quickly isolate and repair any issues.